The veneer peeling machine plays an important role in woodworking, especially in the plywood production line. It turns the log into a thin veneer layer by layer, and then splicing, gluing, pressing, sawing etc, so that a piece of plywood is made.  This article is mainly for you to talk about the use of veneer peeling equipment to pay attention to some safety matters, how to use it safely, please keep in mind.

First of all, the user is required to stand on the side of the machine, and do not stand in the travel range of the machine after the machine is started.  Adjust the position of the wood, after entering the machine can not be adjusted into, the machine speed should be uniform, not too fierce.  If the centering of the log is not accurate, it will spin out the intermittent veneer, resulting in losses and can not be continuously produced.  The original unbent wood will spin out broken veneer.  To check the running condition of the equipment, the installation of the components is correct, after the completion of the veneer peeling, to use sticks and other tools to remove the remaining wood core of the veneer peeling machine, remember not to use hands to take, so as to avoid danger.